Metal Roof and Wall Panels

With several profile and color options www.steelroofpanels.com offers panels, trims and accessories to meet almost any project parameters. Our customers receive high quality products, attention to detail, professional support and low economically priced materials. With over (40) nationwide shipping locations we offer freight costs at a fraction of other companies, and offer availability in a much quicker time frame. No matter what your steel panel or accessories needs are our customer service department will be glad to assist you in take off or material pricing.

High R Rib
Secure Loc Rib
High Rib Steel Panels with Intermediate Ribs
Low Rib Tight Locking Steel Panels
1 1/4” high rib 12” on center with intermediate ribs and is considered a structural panel. This attractive rugged panel offers commercial grade performance is often seen in new metal building construction. 5/8” high rib with panel coverage of 36”. This common practical panel is ideal for pole buildings, liner panel, and residential.
   
Century Pro Rib
Pro Loc
Commercial and Agricultural Steel Panel
Tight Locking Steel Panels
¾” high rib 9” on center with an added striation and intermediate ribs for strength and a tighter lock. Used in Commercial and Agricultural applications.
13/16” deep ribs 6” apart. It is a commercial structural panel which does not require a solid substrate and can go over roof purlins. It is a great looking panel profile for roofs, walls, awnings, partition walls and wall liner panel.
   
Future Rib
Regency Loc
High Rib Steel Panels
High Ribbed Steel Panels
1” high rib with panel coverage of 16” and has a very attractive finish. This Snap together concealed fastener  rib requires a minimum of 3:12 roof slope for proper drainage and solid decking under with 30lb felt such as in residential or architectural applications.
3” high rib with panel coverage of 24” and is a structural standing seam panel. This panel does not require a solid sub decking under and may span up to 60” depending on the roof load requirements. It is considered an architectural panel and snaps together with hidden fasteners.
   
Royal Loc w/ Striations
Royal Loc w/ 16" Minor Rib
Residential Metal Roofing Material
Residential Metal Roofing Panels
1” high rib either 12” or 16” panel widths. This is a true architectural panel primary used in residential, commercial overhangs and roofs and awnings. This panel requires a solid substrate such as plywood with 30# felt under the steel panel. Available with minor ribs or striations. Waviness in the panel referred to as “oil canning” may occur and is inherent to this type of panel and is not a cause for rejection. Narrow widths, lighter colors and heavier gauges minimize “oil canning”.
1” high rib either 12” or 16” panel widths. This is a true architectural panel primary used in residential, commercial overhangs and roofs and awnings. This panel requires a solid substrate such as plywood with 30# felt under the steel panel. Available with minor ribs or striations. Waviness in the panel referred to as “oil canning” may occur and is inherent to this type of panel and is not a cause for rejection. Narrow widths, lighter colors and heavier gauges minimize “oil canning”.
   
Royal Loc w/ 12" Minor Rib
5V Crimp Panel
Minor Rib Metal roofing Panels
Deep Rib Steel Panels For A Flat Look
1” high rib either 12” or 16” panel widths. This is a true architectural panel primary used in residential, commercial overhangs and roofs and awnings. This panel requires a solid substrate such as plywood with 30# felt under the steel panel. Available with minor ribs or striations. Waviness in the panel referred to as “oil canning” may occur and is inherent to this type of panel and is not a cause for rejection. Narrow widths, lighter colors and heavier gauges minimize “oil canning”. ½” deep rib with a panel width of 24”. It is a common residential application and offers the flat panel look. It requires a solid substrate such as plywood with 30# felt under. Waviness in the panel referred to as “oil canning” may occur and is inherent to this type of panel and is not a cause for rejection.
   
Wave Panel
Corrugated Steel Panels
Available with ½” deep profile x 24” wide panel or a 7/8” deep profile x 32” coverage. . It requires a solid substrate such as plywood. Commonly seen on old barn roofs, sheds and it many architectural applications replicating the “old look”.

The exterior materials used in the manufacturing of metal panels contain a sustainable amount of recycled content and the metal panels themselves are reusable or recyclable. The recycled low weight materials are made with recaptured metals and are light to ship, reducing transport and installation energy. Metal panels last as long as the service life of a typical commercial steel building. These durable metal panels reduce energy and maintenance costs, and offer multiple end-of-life reuse options.

 

Follow Us!
     

 

   

Steel Roof Panels ~10390 Bradford Road Suite 140, Littleton, CO 80127 ~Toll Free 1.800.486.8415 ~ Fax 303.948.2059

Copyright © 2011 Building Outlet Corp. All Rights Reserved